Gotta leave a bit more room at the top. General where the threads start. Other than that, looks like a clean batch.

The biggest thing with fermentation is STERILIZING EVERY.THING.

Bake your jars at 150-170 in an oven for 20m before packing (allow to cool a bit). Wash and boil your weights for a few minutes. Don’t use chlorinated water. And always weigh your contents and create a brine by WEIGHT, not volume.

Pretty foolproof otherwise.

Thanks for the advice! I used boiling water to sterilize the jars, lids, and weights in this instance. Would you say that’s sufficient compared to the oven? I used filtered water from my fridge for the entire process (washing and for making the brine).

Weighed everything out using a scale. Did a 4% salt brine by weight. Last time I did 2.5% so this time I went a bit higher to be on the safe side.

What exactly do you mean when you say “leave a bit more room at the top”? Room for what?

Yeah, boiling works as well for everything, just maybe more involved for entire jars. Oven works as well, especially if you’re doing many at a time.

Headspace in the top of the jar. Most ferments really create a lot of activity in bubbles and such in the first 2-5 days. If you fill the jars all the way to the top, that bubbling mess will spill over or clog the venting mechanism, allowing mold or yeast to grow.

This is my second attempt at lactofermentation pickling. I tried for the first time last year and it went horribly wrong, so I haven’t tried again since.

I received some self-burping jars and glass weights as a gift and have decided to give it another try.

This is 1lb of serrano peppers that I hope to turn into hot sauce when it’s all said and done. The jars were much more full initially; the glass weights have condensed the peppers considerably at this point.

Today is day 4 (of maybe a 14 day fermentation period). The brine has started to get cloudy and I can see bubbles forming beneath the surface, which seem to be good signs.

Fingers crossed. If the whole process goes well, I’d like to bring some home-made fermented hot sauce to Thanksgiving this year.

This is my second attempt at lactofermentation pickling. I tried for the first time last year and it went horribly wrong, so I haven’t tried again since.

I received some self-burping jars and glass weights as a gift and have decided to give it another try.

This is 1lb of serrano peppers that I hope to turn into hot sauce when it’s all said and done. The jars were much more full initially; the glass weights have condensed the peppers considerably at this point.

Today is day 4 (of maybe a 14 day fermentation period). The brine has started to get cloudy and I can see bubbles forming beneath the surface, which seem to be good signs.

Fingers crossed. If the whole process goes well, I’d like to bring some home-made fermented hot sauce to Thanksgiving this year.

This is my second attempt at lactofermentation pickling. I tried for the first time last year and it went horribly wrong, so I haven’t tried again since.

I received some self-burping jars and glass weights as a gift and have decided to give it another try.

This is 1lb of serrano peppers that I hope to turn into hot sauce when it’s all said and done. The jars were much more full initially; the glass weights have condensed the peppers considerably at this point.

Today is day 4 (of maybe a 14 day fermentation period). The brine has started to get cloudy and I can see bubbles forming beneath the surface, which seem to be good signs.

Fingers crossed. If the whole process goes well, I’d like to bring some home-made fermented hot sauce to Thanksgiving this year.

This is the first time I’m hearing of this technique. Seems really interesting. What does the fermentation process do to the peppers? How do they end up tasting?

Good luck! This looks great so far.

I’ve also sterilized with a three part process of soap/water, then diluted bleach, then a quick spray of Star San before bottling. That process came from chilichump on YouTube, and I’ve had a lot of success with it.

Thanks! I’ll check it out – I’ve been wanting to find a more comprehensive sanitation process for this, since it can be so prone to going bad if not done correctly.

Good luck! This looks great so far.

I’ve also sterilized with a three part process of soap/water, then diluted bleach, then a quick spray of Star San before bottling. That process came from chilichump on YouTube, and I’ve had a lot of success with it.

Thanks for the advice! I used boiling water to sterilize the jars, lids, and weights in this instance. Would you say that’s sufficient compared to the oven? I used filtered water from my fridge for the entire process (washing and for making the brine).

Weighed everything out using a scale. Did a 4% salt brine by weight. Last time I did 2.5% so this time I went a bit higher to be on the safe side.

What exactly do you mean when you say “leave a bit more room at the top”? Room for what?

This is my second attempt at lactofermentation pickling. I tried for the first time last year and it went horribly wrong, so I haven’t tried again since.

I received some self-burping jars and glass weights as a gift and have decided to give it another try.

This is 1lb of serrano peppers that I hope to turn into hot sauce when it’s all said and done. The jars were much more full initially; the glass weights have condensed the peppers considerably at this point.

Today is day 4 (of maybe a 14 day fermentation period). The brine has started to get cloudy and I can see bubbles forming beneath the surface, which seem to be good signs.

Fingers crossed. If the whole process goes well, I’d like to bring some home-made fermented hot sauce to Thanksgiving this year.

As the peppers ferment the microbes that are in there are producing Lactic Acid, which gives the sauce a vinegar like twang, and some deep funky notes that are characteristic of lactofermenting. Good for the gut microbiome, and great flavor if you like fermented things.

If you want to go above and beyond impressing people with homemade hot sauce grab something like these: https://www.nicebottles.com/catalog/5ozwoozyshrinks

I used to make my own hot sauces and printed off custom labels too. Throw them in a woozy with the plastic heat seal and people lose their shit over them

I wrote down a handful of my recipes somewhere if you want any of them

Haha, I’ve contemplated buying my own bottles for the extra panache once I get the hang of the actual fermenting process.

Until then, I’ve recycled a dozen or so hot sauce bottles from my hot sauce rack for this purpose.

I certainly won’t say no to a recipe. This is the recipe I’m currently using (though I didn’t follow these specific fermentation steps because they are not done by weight) . If you have anything in a similar vein, I’d love to compare and contrast them.

Nice. Thanks for the breakdown

This is my second attempt at lactofermentation pickling. I tried for the first time last year and it went horribly wrong, so I haven’t tried again since.

I received some self-burping jars and glass weights as a gift and have decided to give it another try.

This is 1lb of serrano peppers that I hope to turn into hot sauce when it’s all said and done. The jars were much more full initially; the glass weights have condensed the peppers considerably at this point.

Today is day 4 (of maybe a 14 day fermentation period). The brine has started to get cloudy and I can see bubbles forming beneath the surface, which seem to be good signs.

Fingers crossed. If the whole process goes well, I’d like to bring some home-made fermented hot sauce to Thanksgiving this year.

Most of the time I fermented garlic in the jar with the peppers, and depending on what I was doing I’d also ferment them with onion, carrots, or pears. You can also use cheesecloth and twine to make a little fermenting tea bag for things like peppercorns and mustard seed to keep in with the peppers.

As for the post ferment my staples were: caramelized onion, honey, lime juice and/or apple vinegar, msg. I’d often add fresh bell peppers for a little brightness, mango or pineapple, fresh or roast garlic, you can really play around in this stage. You can also run fermented honey garlic alongside and add that in after the peppers ferment.

My better recipe notes are going to be harder to find they’re in a notebook somewhere but here’s some of my digital ones. The section header shows what was in the jar during ferment (so like ‘hab + garl’ means habanero and garlic) with the other stuff being what was added post ferment. Ferm juice is the brine, truff is truffle oil. All of these also have an unlisted amount of canola oil I’d slowly add in during blending until the immersion felt right.

Boiling water isn’t enough to kill a lot of hardier bacteria and fungal spores and so it’s certainly not “sterilized”, though it may be ‘sterile enough’ for your purposes. Water just can’t get hot enough and the “shells” are well insulated enough to survive for hours in those conditions.

However, they also become tougher once dehydrated and so simply placing them in a really hot stove has the same issue.

You simultaneously need more heat, pressure, time, and possibly some form of chemical attack to truly “sterilize” something.

Using a pressure cooker and a tiny amount of alcohol, ethanol, is usually enough to do the trick.

So many people way overuse the term “sterilize”.

For anyone unaware, “sterile” means zero life remaining, not “really clean”. You serilize things with a pressure canner and strict protocols or an autoclave (which is essentially a pressure cooker). With steam, you need 15 minutes at 121 °C or 3 min at 134 °C. Dry heat requires 2 hours at 160 °C.
There are a handful of other ways (like tyndallization), but not common or convenient.

For fermentation, you don’t need sterile unless you are working in a yeast lab or something like that where you are trying to grow up pure cultures. Sanitization or disinfection is good enough. Basically you want to kill enough of the bad bacteria/yeast that the good stuff out competes it.

Trying to get jars sterile for fermenting peppers is pointless because the peppers themselves are host to a huge heterogeneous population of bacteria and yeast, and you aren’t operating under a laminar flow cabinet or something crazy like that.

Yeah, you want them clean and sanitized, but it’s really all about controlling the probabilities. Higher salt concentration helps, being really careful about keeping things submerged helps, using a good airlock and relatively small headspace helps, and rejecting any peppers that seem suspect helps. Also, resist the urge to open the jars a whole bunch of times. Every time you do, you let in oxygen.

Also, OP, buy some pH test paper. It’s nice to be able to double check that the pH is in the right range once you think it’s done.